Pin on Disc Wear Apparatus
The Present setup Pin on Disc Wear Test Rig is designed to study friction and wear characteristics in sliding contacts. Sliding occurs between a stationary pin and a rotating disc. Normal load and wear track diameter can be varied. Tangential frictional force and wear are monitored with electronic sensors. This test rig is suitable for demonstration of wear and friction properties.
Technical Specification :-
| Wear disc |
Diameter : 200 mm Thickness : 6 minimum & 8 mm maximum
|
| Pin diameter |
6 mm
|
| Pin length |
25 mm
|
| Wear track diameter |
50 mm minimum & 80 mm maximum , variable
|
| Disc speed |
0 to 1400 rpm
|
| Normal load |
5 to 30 ( in steps of 5N)
|
| Frictional force |
0 to 30 kg
|
| Wear range |
0 to 2 mm
|
| Preset timer |
1 to 59 minute
|
| Specimen pin length |
25 to 30 mm
|
| Pin holders |
Diameter :- 4 to 6 , 8 to 10 , 10 to 12 mm ( 1 nos. each )
|
| Motor |
AC motor with drive
|
| Pin heating module |
Up to 300 degree c
|
You May Also Like
